CWC® SMART LASTIC 200
CWC®SMART LASTIC 200 is a two component, elastomeric, acrylic polymer modified cementitious waterproofing protective coating system in slurry form.
- Two Part Acrylic Polymer Based High Performance Waterproof Coating
Indicative Characteristics
| Color of Pack-A (Liquid) | Milky White |
| Color of Pack-B (Powder) | Grey |
| Color of hardened coating | Cement like Grey |
| Workable time, minutes, 27⁰C, 70% RH | 30 (approx.) |
| Permeability to water, as per IS 2645 | Nil |
| % Elongation at 14 days, ASTM D 638 | 200 (minimum) |
| Tensile strength at 14 days, N/mm2 , ASTM D 638 | 5 (minimum with fibre mesh) |
| Coverage | 1.5-1.7kg/mm/m2 |
| Mix Ratio (Liquid: Powder) by wt. | 1:1.4 |
| Static Crack Bridging Capacity | 2mm (minimum) |
| Recommended film Thickness | 1-1.5mm |
| Initial cure for light foot traffic at 65% RH, | 12 hours |
| Full Cure at 65% RH | 7 days |
CWC®SMART LASTIC 200 is a two component, elastomeric, acrylic polymer modified cementitious waterproofing protective coating system in slurry form.
- Resistant to UV (Ultra – Violet) rays
- Develops excellent bond with most of the building materials.
- Prevents peeling and blistering
- Arrests salt petre and prevent penetration of salts into concrete and mortar.
- Unaffected by chemical attacks ranging from mild acids and strong alkalis.
- Highly durable in continuous wet service condition.
- One time application, properties improve with age.
- Wear hand gloves, safety shoes and safety goggles while using and handling the product.
- In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
