CWC® SMART ANCHOR
Smart Anchor is a two-component, polyester resin based, anchoring grout. It consists of a low viscosity polyester resin plus a catalyzed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes.
- Rapid setting. High early strength gain.
- re-batched for ease of mixing.
Indicative Characteristics
| Packaging | 1 kg pail (A+B) packaging. |
| Shelf life | 18 months from date of manufacture. |
| Storage conditions | Store properly in dry conditions in undamaged and unopened original sealed packaging. Storage at high temperatures or high humidity may reduce the shelf life. |
| Appearance and colour | Dark grey when mixed. |
| Density | ~ 1800 kg/m³ |
Smart Anchor is a two-component, polyester resin based, anchoring grout. It consists of a low viscosity polyester resin plus a catalyzed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is colored dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter. The Product is used for the fixing of steel bolts into predrilled holes within concrete, rock, brickwork, stonework, masonry and other substrates capable of supporting the required load. Available in both winter and summer formulations, giving a wide
range of application temperatures.
- Rapid setting. High early strength gain.
- re-batched for ease of mixing. .
- Contractor friendly packaging size.
- Corrosion resistant. Non-shrink.
- Tested in accordance with the relevant parts of BS 6319 and BS 5080.
- Winter and summer grades available.
- Avoid contact with skin and eyes and avoid swallowing.
- Ensure adequate ventilation and avoid inhalation of vapour.
- Wear suitable protective clothing, gloves, and eye protection.
- In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
- In case of eye contact, wash with plenty of clean water and seek medical advice.
- If swallowed, seek medical attention immediately. Do not induce vomiting.
The MSDS is available on www.cwcchemical.com
