CWC® SMART EPOCRETE 2115
CWC®SMART EPOCRETE 2115 is three components solvent
free, fast curing, high strength epoxy mortar.
Pack –A: Base, Pack –B: Hardener, Pack-C: Graded Filler.
- For carrying out structural repairs, it can be filled into concrete / mortar voids and pockets.
- Cured resin possesses high mechanical strength, excellent adhesion, non-shrinking properties, and chemical resistance properties.
- Can be used as an Epoxy Mastic.
Indicative Characteristics
| Mixing Ratio (Pack A : B:C), by wt. | 2 : 1.15 |
| Specific Gravity at 30°C | 1.95 – 2.15 |
| Pot life, minutes, 30°C | >30 minutes |
| Comp. Strength, 14 days, MPa | >70 |
| Tensile Strength, N/mm², 14 days | 15 (Minimum) |
| Flexural Strength, N/mm², 14 days | 20 (Minimum) |
| Shrinkage | Non-shrink |
| Chemical Resistance | Unaffected by a wide range of Chemicals, Oils etc. |
| Water absorption, ASTM D 570 | Passes Test (Less than 1%) |
CWC®SMART EPOCRETE 2115 is three components solvent free, fast curing, high strength epoxy mortar.
Pack –A: Base, Pack –B: Hardener, Pack-C: Graded Filler.
- For carrying out structural repairs, it can be filled into concrete / mortar voids and pockets.
- Cured resin possesses high mechanical strength, excellent adhesion, non-shrinking properties, and chemical resistance properties.
- Can be used as an Epoxy Mastic.
- Although CWC® SMART EPOCRETE 2115 has high strength, the cured material is not brittle and retains a slight flexible nature.
- It is supplied in pre-measured quantities of Component-A (Resin), Component-B (Hardener), and Component-C (Special Aggregate) according to the mixing proportion.
- Wear hand gloves, safety shoes and safety goggles while using and handling the product.
- In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
