CWC® EPOCRETE 41 LV
CWC®SMART EPOCRETE 41 LV is two components (Component A –Resin, and Component B -Hardener) solvent free ultra-low viscosity free flowing, fast curing epoxy resin system.
- Designed especially for pressure injection into concrete for carrying structural repairs.
- Grouting of machine base plate, bridge bearing bases, anchoring of bolts, etc.
Indicative Characteristics
| Mix Ratio by wt. Part A:B | 4:1 |
| Color of mixed products | Light to Dark Amber |
| Pot life at 27⁰C minutes | 40 |
| Relative Density of mixed material, 30⁰C | 1.09 |
| Viscosity, cps at 30⁰C | 270 |
| Compressive Strength, N/mm2, 24 hours | 53 |
| 7 days, at 30⁰C | 75 |
| Flexural Strength, N/mm2, 7days, 30⁰C | 13 |
| Chemical Resistance, Inorganic alkali, and acid solution (10%) |
After 12–18 hours |
| Pull out Bond Strength, at 7 days, N/mm² | No change |
| Consumption per 5 kg pack | 4.5 – 4.6 Litres |
CWC®SMART EPOCRETE 41 LV is two components (Component A –Resin, and Component B -Hardener) solvent free ultra-low viscosity free flowing, fast curing epoxy resin system.
- Designed especially for pressure injection into concrete for carrying structural repairs.
- Due to its low viscosity, it can be injected into extremely fine cracks also.
- The cured resin possesses high mechanical strength, excellent adhesion, practically no shrinkage and chemical resistance.
- Fine cracks, joints and small voids can be successfully sealed with CWC®SMART EPOCRETE 41 LV
- Although CWC®SMART EPOCRETE 41 LV has a very high strength, the cured material is not brittle and remains a slight flexible in nature.
- Wear hand gloves, safety shoes and safety goggles while using and handling the product.
- In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
