CWC® SMART LASTIC
CWC® SMART LASTIC coating at no point of time should be left completely dry or submerged in water.
- After application of CWC® SMART LASTIC system, initial air-drying shall be done for 3-6 hours.
- After the moist curing the CWC® SMART LASTIC coating shall be allowed to air dry for 3 days before submersion in water.
Indicative Characteristics
| Color of Pack-A (Liquid) | Milky White |
| Color of Pack-B (Powder) | Grey |
| Color of hardened coating | Cement like Grey |
| Workable time, minutes, 27⁰C, 70% RH | 30 (approx.) |
| % Elongation at 14 days, ASTM D 638 | 100 (minimum) |
| Tensile strength at 14 days, N/mm2 , ASTM D 638 | 5 (minimum with fibre mesh) |
| Coverage | 1.5-2kg/mm/m2 |
| Initial cure at 270C, for pedestrian traffic | After 24hours |
| Full cure, days | 7 |
CWC® SMART LASTIC is a two component, high performance elastomeric acrylic polymer modified cementitious waterproofing protective coating system. It requires only theaddition of clean water at site to produce an easily brushable coating.
- Can be used on damp substrates.
- Offers high adhesive bond strength.
- Excellent slip resistance.
- High early strength.
- Fast curing.
- Water resistant.
- Long open wet time (upto 30 minutes).
- Thixotropic property.
- Tropicalized and eco‐friendly, offers no health hazards to users.
- Economical
- Wear hand gloves, safety shoes and safety goggles while using and handling the product.
- In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
