CWC® SMART PMC60
CWC®SMARTCEM PMC 60 can be applied in thickness from 10 mm to 40 mm in vertical and 25 mm in overhead situation.
- Polymer Modified Fiber Reinforced Non-Structural Concrete Repair Mortar.
- It is a general purpose cementitious repair compound which is used to reinstate damaged and deteriorated concrete.
Indicative Characteristics
| Appearance | Free flowing grey powder |
| Compressive Strength, N/mm² (Typical) at 27ºC | (W/P= 0.15) |
| 1 day | >15 |
| 7 days | >50 |
| 28 days | >60 |
| Free Linear Expansion, ASTM C 827 | 0 – 2% |
| Coefficient of Thermal Expansion, per ºC | 1-12 x10-6 (Similar to Concrete) |
| Flexural Strength, 28 days, N/mm² (Typical) at 27ºC | >7 |
| Bond Strength, 28 days, N/mm² (Typical) at 27ºC | >2 |
| Pot Life, at 27ºC, minutes | >30 |
| Fresh Wet Density, kg/m³ | 2150 – 2250 |
| Material required for 1m³ Volume, kg | 1850 – 1950 |
CWC®SMARTCEM PMC 60 is a single component cementitious, polymer modified non-reactive selective fiber reinforced repair mortar to provide excellent properties as well as resistance to corrosion and carbonation and shrinkage cracking. CWC®SMARTCEM PMC 60 can be applied in thickness from 10 mm to 40 mm in vertical and 25 mm in overhead situation. It is suitable to apply by hand trowel or by special mortar spray machine.
- Controlled expansion to ensure positive surface contact
- Chloride free and non metallic, hence no rusting or staining on exposed edges
- Excellent bond to the concrete and steel substrate
- Low permeability provides maximum protection against corrosion and carbonation.
- Ready to use – only addition of water is needed at site.
- Wear hand gloves, safety shoes and safety goggles while using and handling the product.
- In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
