CWC® SMART SIL
CWC® SMART SIL Acrylic Paste is a single pack, acrylic based, ready to use putty for filling and sealing the cracks on internal and external plastered surfaces.
- Paste form, easy to apply.
- Can be used for both internal and external surfaces.
Indicative Characteristics
| Chemical Base | Acrylic paste |
| Appearance / Colour |
White paste |
| Density | 1.5 ± 0.1 kg/L |
| Consumption | 1 kg covers 40–50 linear meter for crack of 6 mm x 6 mm |
| Ambient Air Temperature |
˃+5 °C min. / +40 °C max. |
| Substrate Temperature |
+5 °C min. / +40 °C max. |
| Service Temperature |
+5 °C min. / +45 °C max. |
| Drying Time | |
| Skinning time | ~20 minutes (+25 °C & 50% r.h.) |
| Curing rate | ~2 mm / 24 h (+25 °C / 50% r.h.) |
CWC® Smart Sil Acrylic Paste is a single pack, acrylic based, ready to use putty for filling and sealing the cracks on internal and external plastered surfaces.
- Paste form, easy to apply.
- Non-shrink.
- Can be used for both internal and external surfaces.
- Can be used to seal hairline cracks.
- Can be applied on damp surfaces but not on cracks with running water.
- Non-staining.
- UV resistant.
- Can seal non-moving cracks up to 6 mm wide in plasters and walls.
- Self-curing and excellent adhesion with substrates for both vertical and horizontal application.
- Pre-test for over paintability and paint
compatibility are recommended. - Close the container tightly after application
and prevent contact of material with air
while not in use to prevent curing and
hardening of material
Before use, refer to the Material Safety Data Sheet.
The MSDS is available on www.cwcchemical.in
